HO H14 H16 H18 Alloy Aluminum Heat Transfer Plates For Auto
Radiator Mill Finish
Specification of aluminum plate
1)Core Alloy:3003,3003+1.5%Zn+Zr
2)Cladding alloy: 4343, 4045, 7072, 5052 etc
3)Cladding rate: 4%-18%
4)Temper:HO,H14,H24
5)Regular Thickness:0.5mm,1.2mm,1.5mm,2.0mm or other thickness as per customers'
requirement
6)Regular Width: 1070mm,1200mm,1250mm or other width as per customers' requirement
7)Regular length: 2000mm,2400mm or other length as per customers' requirement
8)Other sizes is available according to customers' request
Core Material
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Zr | Ti | code |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | － | 0.1 | 0.05 | 0.03 | 1 |
| 3003+1%Zn | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | － | 0.5-1.50 | 0.05 | 0.05 | 2 |
| 3003+1.5%Zn | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | － | 1.0-2.0 | 0.05 | 0.05 | 3 |
| 3003+1.5%Zn+Zr | 0.5-1.0 | 0.7 | 0.05-0.20 | 1.0-1.6 | － | 1.0-2.0 | 0.05-0.2 | - | 4 |
| 3003+0.5%Cu | 0.6 | 0.7 | 0.30-0.70 | 1.0-1.5 | － | 0.10 | 0.05 | 0.1 | 5 |
| 3005 | 0.6 | 0.7 | 0.20-0.40 | 1.0-1.5 | 0.20-0.60 | 0.25 | － | 0.01 | 6 |
Cladding Material
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Zr | Ti | code |
| 4343 | 6.8-8.2 | 0.8 | 0.25 | 0.1 | － | 0.2 | － | 0.05 | 1 |
| 4343+1%Zn | 6.8-8.2 | 0.8 | 0.25 | 0.1 | － | 0.5-1.5 | － | 0.05 | 2 |
| 4045 | 9.0-11.0 | 0.8 | 0.3 | 0.05 | － | 0.2 | － | 0.2 | 3 |
| 4045+1%Zn | 9.0-11.0 | 0.8 | 0.3 | 0.05 | － | 0.5-1.5 | － | 0.2 | 4 |
| 4004 | 9.0-10.5 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | － | 0.2 | 5 |
| 7072 | 0.7 | 0.1 | 0.1 | 0.1 | 0.8-1.3 | － | － | 6 |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.5-1.0 | － | 0.03 | 7 |
FAQ:
1, Q: Are you manufacturer?
A: Yes, as a manufacturer our customers are welcome to visit our
factory.
2, Q: Do you accept customized orders?
A: Yes, we do. Your customized orders are always welcomed. Please
kindly offer us your technical perfrmances or samples so that we
can customize the products according to your preferences. About any
further detail, please feel free to contact us.
3. Q: How can I get one quotation faster?
A: Pls offer details about your demands as more as possible, alloy,
temper, thickness, width, quantity,application,etc.
4. Q: If I can not offer above information,what should I do?
A: Try your best to offer more information,we will help you design
suitable material.
5. Q: What is your company sample policy?
A: As one supplier,we see that sample is necessary for our both
sides, our policy is to offer samples as possible as we can, About
sample shippment,you need to pay for the freight,usually freight
collect by express.
